Engineered to conform with Civil Aviation Authority of Singapore (CAAS) safety provisions and CAP 437 standards. Select a profile configuration below to request a detailed engineering proposal.
Singapore occupies a central position in the global maritime industry and Southeast Asian aviation networks. Serving as a crucial hub for marine services, offshore exploration, and regional healthcare logistics, the city-state demands infrastructure of the highest standard. Urban space limitations require structural elements to be lightweight yet capable of carrying heavy, dynamic loads.
Aluminum profiles for helicopter landing decks have largely replaced steel and concrete structures. This shift is driven by their high strength-to-weight ratio, which reduces the dead load on high-rise commercial structures in the Downtown Core, Sentosa offshore terminals, and deepwater marine vessels operating from Singapore's yards. Highly saline tropical marine conditions in Singapore also demand materials with exceptional corrosion resistance, reducing long-term maintenance costs.
Building offshore platforms and urban rooftop helipads in Singapore requires comparing traditional building materials against advanced structural aluminum alloys. The table below details these material properties:
| Evaluation Parameter | Aviation Grade Aluminum Alloy (Lvxing 6xxx Series) | Structural Carbon Steel (Q345B) | Reinforced High-Strength Concrete |
|---|---|---|---|
| Dead Load Weight Factor | Low (Approx. 2.7 g/cm³ - up to 65% lighter than steel) | High (Approx. 7.85 g/cm³) | Extremely High (Approx. 2.4 - 2.5 t/m³) |
| Salt Spray Corrosion Resistance | Excellent (Al 6082-T6 natural protective oxide layer) | Poor (Requires regular sandblasting & marine coatings) | Medium (Prone to spalling & carbonation in marine air) |
| Fabrication & Installation Speed | Rapid (Interlocking profiles with zero-weld bolting) | Slow (Extensive hot-work onsite welding & inspection) | Very Slow (Extended concrete pouring and curing times) |
| Non-Sparking Safety Properties | Non-sparking (Required for hazardous offshore gas zones) | Risk of impact sparking upon collision | Non-sparking but susceptible to severe structural chipping |
| Dynamic Load Tolerance | Excellent deflection control & elastic absorption | High yield strength but prone to fatigue | Brittle under extreme cyclic stress profile spikes |
Established in 2015 and located in Foshan City, Guangdong, LvXing Intelligent Equipment Co., Ltd. boasts a skilled R&D team with extensive experience. We leverage exceptional technical expertise to effectively transform customers' ideas into reality, consistently meeting their precise requirements.
We utilize premium Fenglu aluminum, offering a diverse range of profiles for flexible applications. Our extrusion lines, ranging from 800T to 20,000T, accommodate alloys 1xxx, 2xxx, 3xxx, 5xxx, 6xxx, and 7xxx, allowing us to produce shaped products with section dimensions up to 1.2 meters in width and 28 meters in length. These products are recognized for their precision and meticulous processing, finding broad application in aerospace, military, medical, and industrial sectors.
Our commitment to excellence is evident throughout the manufacturing process, rigorous quality control, thorough packaging, and efficient shipping procedures. This dedication has earned us recognition as a national excellent and honest enterprise, along with quality system certification in accordance with GB/T19001-2016/ISO9001:2015 standards.
We have obtained the "Special Aluminium Materials for Aerospace" Certificate. This ensures our profiles handle the dynamic and thermal loads of modern rotorcraft during landing maneuvers.
We supply high-quality Fenglu aluminum profiles. With extrusion lines ranging from 800T to 20,000T, we produce alloys in the 1xxx to 7xxx series. We manufacture shaped products up to 1.2 meters wide or 28 meters long.
Our team of technicians brings 15 years of industry experience. Our deep understanding of customer requirements allows us to identify potential issues and offer practical insights, turning ideas into finished products.
High-integrity aluminum extrusions are designed to meet the demands of Singapore's major industrial sectors:
As Singapore rolls out UAM trials and designs vertiports for electric vertical takeoff and landing (eVTOL) aircraft, landing deck technology is shifting. Lvxing is actively developing advanced aluminum profiles to support these developments:
eVTOL aircraft feature multi-rotor propulsion configurations, creating localized dynamic loading profiles that differ from conventional single-rotor helicopters. Our research focuses on optimizing the internal webbing of 6082-T6 and 6005A-T6 extrusions to withstand cyclic dynamic stresses and prevent structural fatigue.
Future landing decks will integrate smart components directly into the aluminum profiles. We are developing extrusion profiles with built-in channels for LED perimeter lights, visual landing aids, and drainage networks. These channels protect wiring and plumbing from mechanical damage and weather exposure.
Lvxing aligns with the Singapore Green Plan 2030 by utilizing low-carbon aluminum smelted with renewable energy, alongside clean recycling loops for extrusion scrap. At the end of its life, an aluminum helideck is 100% recyclable, retaining its scrap value and reducing the carbon footprint of municipal building projects.
From custom extrusion die design to sea freight delivery directly to Singapore berths, we offer a comprehensive structural support solution:
We work with project engineers to draft custom cross-sections. Using our 20,000T extrusion press, we produce extra-wide panels that minimize assembly seams and reduce overall structural deflection.
Our CNC machining centers mill connection slots, pre-drill assembly holes, and profile edges to tolerance levels below 0.5mm, ensuring straightforward installation at the project site.
We manage packaging and container load balancing to secure profiles for marine transit, ensuring they arrive at Singapore ports on time and in perfect condition.
Browse our certified structural profiles and custom landing deck solutions. All products can be customized for specific marine, civil, or medical projects in Singapore.
Key technical and logistical information for structural engineers and project planners specifying helipad profiles for Singapore and Southeast Asian markets.
We primarily utilize 6082-T6 and 6061-T6 aluminum alloys. 6082-T6 offers high structural strength and impact resistance, making it suitable for structural floor decking panels. Both alloys provide high resistance to marine corrosion, which is critical for coastal and offshore installations in Singapore.
Our engineering division coordinates custom profiles to match structural design requirements, including landing impact criteria, peripheral safety net mounts, and surface drainage options. Material certifications conform to ISO 9001:2015, ensuring consistent quality for aviation infrastructure projects.
Leveraging our heavy-industry extrusion lines (ranging from 800T up to 20,000T), we produce individual structural profiles with section widths up to 1.2 meters and continuous lengths up to 28 meters. This reduces the number of structural field connections, simplifying assembly and installation.
We supply profiles with mill finishes suitable for site-applied aggregate systems, or pre-engineered anti-slip grooved surfaces. Additionally, we provide custom marine-grade anodizing and hard-coat polyurethanes to withstand continuous UV radiation and chemical exposure.
All profiles are processed at our facility, bundled, and protected against moisture. Shipments are dispatched from southern Chinese ports directly to Singapore terminals, keeping transport timelines within project schedules.
LvXing